8:30 a.m. to 5:30 p.m.
Lambda Transmitter LT3 KS1D (SIL1)
- Combined O2 and CO/H2 measuring
- Measuring directly inside flue gas
- Applicable up to 1200 °C
- Independent of infiltrated air (COe)
- Ex design
Technical Data
| Measuring range : | O2: 0-21 % (configurable) COe: 1ppm in CO range 0…10.000 ppm (configurable) |
| Housing: | Sheet steel |
| Protection type following DIN 40050 | IP66, without display IP54, with embedded start-up assistant inside front door |
| Dimensions (HxBxT) mm | 300 x 300 x 120 |
| Color | Grey, RAL 7035 |
| Weight | Appr. 6kg |
| Ambient temperature operation: |
-5 °C … + 60 °C |
| Ambient temperature transport and storage: |
-20 °C … + 70 °C |
| Power supply: | 120 VAC / -30%…230 VAC / +10%, 50…60Hz |
| Power consumption: | 30W (normal operation) 69W (heating) |
| Resolution O2: |
0-21 % (configurable) |
| Resolution COe: | 1 ppm in CO range 0…1000 ppm |
| Preciseness of measuring: (with combination probe KS1D) |
O2: ±5% of measurement value (max ± 0,3 Vol. % O2) COe: ±25% of measurement value (not better than +/- 20 ppm after prior calibration for application conditions with a CO-reference measuring) |
| Setting time (60 % time): | O2: T 60 < 10 s COe: T 60 < 2 s |
| Time for readiness with KS1D (cold start-up) |
Appr. 10min after „POWER ON“ (Initial start-up appr. 60min) |
| Analogue output, via analogue output module: | Analogue output 1 (O2 measurement value) – Range of setting: 0…25 % O2 – Factory setting 0…10 Vol.% O2 -> 4…20 mA Analogue output 2 (CO-measurement value) – Range of setting: 0…1000 ppm – Factory setting 0…1000 ppm -> 4…20 mA |
| Digital outputs via digital output module: |
Optional |
| Control element: | Integrated LT3 User Interface with LCD-graphic display 45×27 mm (BxH) External start-up assistant with LCD-graphic display 60×32 mm (BxH) (Option) |
| Interface: | LAMTEC System Bus (LSB) |
| Approvals: |
SIL 1 Confirmation:
|
Purpose
The Lambda transmitter LT3 in connection with the combination probe KS1D is developed for simultaneous measurement of O2 concentration and oxidizing gas elements (CO/H2), displayed as COequivalent in exhaust gases of combustion plants within hyperstoichiometric ranges (λ > 1).
The display and handling of the LT3 is managed via user interface inside the front door (belongs to standard delivery), with the following functions:
- Display of O2 and COe measurement values
- Password entry
- Informationen about probe and fuel, for warnings and failures, for software versions, CRC and serial number
- Calibration of measurement
- Setup (maintenance, filter time, analogue output, probe exchange, display)
Selection criteria
| Housings and types | Display and operation | Accessory |
| Wall mounting housing | Optional user interface inside front-door | Probe installation fitting (PIF) |
| Start-up assistent in german / english or french language | Gas extraction device (GED) | |
| LSB Remote software for PC | Outside-isolation / Flange blankets | |
Download
English
| Endcustomer information | ||
|---|---|---|
 |
LT3 KS1D – Quick Reference |
|
| Brochure | ||
|---|---|---|
|
Sensory Combustion Optimisation of Gas Combustion Systems |
|
|
Differentiation between LT2 and LT3 – Comparison |
|
|
LT3 LS2 KS1D – System Overview |
|
|
LT3-Ex KS1D-Ex – System Overview |
|
Please login here to see more downloads and also CAD Data.
German
| Endcustomer information | ||
|---|---|---|
|
LT3 KS1D – Kurzanleitung |
|
French
| Endcustomer information | ||
|---|---|---|
|
LT3 KS1D – Instructions sommaires |
|
| Brochure | ||
|---|---|---|
|
LT3 KS1D – Vue d’ensemble du |
|
| Miscellaneous | ||
|---|---|---|
|
La régulation de CO La meilleure alternative à la régulation d’O2 |
|
Chinese (Simplified)
| Brochure | ||
|---|---|---|
|
CO/O2 控制 / LT3-F – 系统简介 |
|
Finnish
| Endcustomer information | ||
|---|---|---|
|
LT3 KS1D – Pikaopas käyttäjälle |
|
Italian
| Endcustomer information | ||
|---|---|---|
|
LT3 LS2 – Manuale sintetico per gli utenti |
|
Polish
| Endcustomer information | ||
|---|---|---|
|
LT3 LS2 – Instrukcja skrócona dla użytkowników |
|
|
LT3 KS1D – Krótkie wprowadzenie dla obsługi |
|
| Brochure | ||
|---|---|---|
|
LT3 LS2 KS1D – Przegląd systemu |
|
Portuguese
| Endcustomer information | ||
|---|---|---|
|
LT3 LS2 – Manual resumido para o utilizador |
|
Russian
| Endcustomer information | ||
|---|---|---|
|
LT3 KS1D – Краткое руководство для пользователей |
|
Swedish
| Endcustomer information | ||
|---|---|---|
|
LT3 LS2 – Snabbanvisning för användare |
|
Turkish
| Technical datasheet | ||
|---|---|---|
|
Taşınabilir Kalibrasyon Ünitesi – Teknik Bilgiler |
|
Please login here to see more downloads and also CAD Data.
